Narrow the list, then add what you need to one quote request.
230VAC Mains operated relay base with Battery Back-up (will fit underneath the 140RC series, the 160RC and the 2110 series of alarms)
230VAC Mains operated relay base (will fit underneath the 140RC series, the 160RC and the 2110 series of alarms)
Provide a unique ‘plug and play’ concept designed specifically to reduce installation time. Utilise a special terminal block, where all initial instal
The ECU723 network card allows an ECU-224 desk controller to be connected to an ECU-4, ECU-8 or ECU-16 master controller. The ECU723 also acts as a ne
• The ECU722 is a network card that is used for expanding the fire telephone or disabled refuge systems of Context Plus. • Allows up to 14 ECU-4, ECU-
The Context Plus Intelligent Multisensor Detector model 55000-885IMC contains an optical smoke sensor and a thermistor temperature sensor whose output
The Mini Switch Monitor is an interface within an entirely new housing. This allows the unit to be fitted onto a standard 35mm DIN-Rail (using a twist
The Repeater of the Context Plus MFP panel is implemented by installing a Repeater Transmitter PCB (Part No. FF596T) in the MFP Main panel. This PCB h
The BF-EOL is an End of Line Unit for the Context Plus Conventional MFP Range of fire panels.
The Context Plus MFP Repeater panel is designed to mimic the key functions of the MFP Main panel at other parts of a building. These functions include
The FF501Z is a Four Zone Extender Card that is designed solely for use with the Context Plus Conventional MFP range of fire control panels. It is use
230Volts Manual Call Point. Sounds all Smoke/Heat/CO alarms to give an evacuation signal. Use with the 140RC series, the 160RC and the 2110 series of
The Context Plus Intelligent Addressable Mains Switching Input/Output Unit provides a voltage free, single pole change-over relay output and a monitor
Context Plus 200-250VAC Mains Multisensor (optical & heat) alarm with built-in sounder, complete with rechargeable 10 year life battery back up and wi
The Intelligent Addressable IR3 Flame Detector of Context Plus is designed to protect areas where open flaming fires may be expected. It is sensitive
The Intelligent Addressable Flameproof IR3 Flame Detector of Context Plus is designed to protect areas where open flaming fires may be expected. It is
The Intelligent Addressable IR² Flame Detector of Context Plus is designed for use in areas where flaming fires may be expected. The detector has two
The Intelligent Addressable Base Mounted UV IR² Flame Detector of Context Plus is designed to protect open indoor areas such as aircraft houses, gener
The Intelligent Addressable Base Mounted UV Flame Detector of Context Plus is designed to protect enclosed indoor areas where open fires may be expect
The Intelligent Addressable Base Mounted IR3 Flame Detector of Context Plus is designed to protect all indoor areas, even in dirty or smoky conditions
