Our Products

Fire suppression equipment, security components, and solar accessories, all from manufacturers we trust.

Browse by category

Narrow the list, then add what you need to one quote request.

Plug in Radio

Plug in Radio

Plug in Radio frequency module with built-in RadioLink transmitter and receiver (868 MHZ signal). Use with 650C & 603TYC. Powered by 10 year life lith
Piston Actuator

Piston Actuator

The Piston Actuator part CP61041 of Context Plus features a pneumatically driven piston that depresses a Schrader check valve, thereby venting the pre
PC programming software, configurator & mini-USB lead for EVC Control units (allows the optional programming of extension names etc via a Windows PC)

PC programming software, configurator & mini-USB lead for EVC Control units (allows the optional programming of extension names etc via a Windows PC)

The ECU423 is a Configuration Tools software for the Sigtel fire telephone system and disabled refuge system of Context Plus. Devices can be named/edi
Pack of 10 Transparent Hinged flip lid Covers for model SA5900-908IMC & 55200-908IMC Manual Call points

Pack of 10 Transparent Hinged flip lid Covers for model SA5900-908IMC & 55200-908IMC Manual Call points

The Context Plus Transparent Hinged Cover has been designed to fit all Context Plus Manual Call Points to provide protection against accidental operat
Output expansion relay board for EP203. Provides volt-free changeover relay contacts for reset, mode, discharged, hold and abort

Output expansion relay board for EP203. Provides volt-free changeover relay contacts for reset, mode, discharged, hold and abort

Output expansion relay board for EP203. Provides volt-free changeover relay contacts for reset, mode, discharged, hold and abort.
Optical Smoke Detector, Xpert Style – 55000-685IMC

Optical Smoke Detector, Xpert Style – 55000-685IMC

This Context Plus Optical smoke detector with XP95 communication protocol works using the light scatter principle and is ideal for applications where

Optical smoke detector HEAD ONLY (Xpert card Style- )- LPCB APPROVED

Optical smoke detector HEAD ONLY (Xpert card Style- )- LPCB APPROVED

The Context Plus Intelligent Addressable Optical Smoke detector 55000-600IMC uses an internal pulsing infrared LED and a photo-diode at an obtuse angl
Optical smoke detector

Optical smoke detector

Context Plus Battery operated optical smoke detector, BSI kitemarked, complete with 9V zinc carbon battery
Operated relay base with Battery Back-up

Operated relay base with Battery Back-up

230VAC Mains operated relay base with Battery Back-up (will fit underneath the 140RC series, the 160RC and the 2110 series of alarms)
Operated relay base

Operated relay base

230VAC Mains operated relay base (will fit underneath the 140RC series, the 160RC and the 2110 series of alarms)
Nozzles ( 1/2″, 3/4″, 1″ , 1-1/4″ , 1-1/2″ , 2″ )

Nozzles ( 1/2″, 3/4″, 1″ , 1-1/4″ , 1-1/2″ , 2″ )

Discharge Nozzles are available in sizes of 1/2″, 3/4″, 1″, 1-1/4″, 1-1/2″ and 2″. Each discharge nozzle comes in two configurations: 180 and 360 degr
No Break Resettable Conventional Manual Call Point

No Break Resettable Conventional Manual Call Point

Provide a unique ‘plug and play’ concept designed specifically to reduce installation time. Utilise a special terminal block, where all initial instal
Network communication card (allows up to fourteen ECU-8 or ECU-8NT or ECU-4 or ECU-16 to be interlinked – one required per networked ECU-8 or ECU-8NT or ECU-4 or ECU-16). Use only when the addition of

Network communication card (allows up to fourteen ECU-8 or ECU-8NT or ECU-4 or ECU-16 to be interlinked – one required per networked ECU-8 or ECU-8NT or ECU-4 or ECU-16). Use only when the addition of

The ECU723 network card allows an ECU-224 desk controller to be connected to an ECU-4, ECU-8 or ECU-16 master controller. The ECU723 also acts as a ne
Network communication card (allows up to fourteen ECU-8 or ECU-8NT or ECU-4 or ECU-16 to be interlinked – one required per networked ECU-8 or ECU-8NT or ECU-4 or ECU-16). Use for EVC control units whi

Network communication card (allows up to fourteen ECU-8 or ECU-8NT or ECU-4 or ECU-16 to be interlinked – one required per networked ECU-8 or ECU-8NT or ECU-4 or ECU-16). Use for EVC control units whi

• The ECU722 is a network card that is used for expanding the fire telephone or disabled refuge systems of Context Plus. • Allows up to 14 ECU-4, ECU-
Multisensor (Optical smoke & Heat) detector HEAD ONLY (Xpert card Style- )- LPCB APPROVED

Multisensor (Optical smoke & Heat) detector HEAD ONLY (Xpert card Style- )- LPCB APPROVED

The Context Plus Intelligent Multisensor Detector model 55000-885IMC contains an optical smoke sensor and a thermistor temperature sensor whose output
Mini Switch Monitor

Mini Switch Monitor

The Mini Switch Monitor is an interface within an entirely new housing. This allows the unit to be fitted onto a standard 35mm DIN-Rail (using a twist
MFP repeater transmitter

MFP repeater transmitter

The Repeater of the Context Plus MFP panel is implemented by installing a Repeater Transmitter PCB (Part No. FF596T) in the MFP Main panel. This PCB h
MFP end of line device

MFP end of line device

The BF-EOL is an End of Line Unit for the Context Plus Conventional MFP Range of fire panels.
MFP 8 zone repeater panel

MFP 8 zone repeater panel

The Context Plus MFP Repeater panel is designed to mimic the key functions of the MFP Main panel at other parts of a building. These functions include
MFP 4-zone MFP extender PCB kit

MFP 4-zone MFP extender PCB kit

The FF501Z is a Four Zone Extender Card that is designed solely for use with the Context Plus Conventional MFP range of fire control panels. It is use