Waterproof manual call point – red (surface); for use with range; IP67 with built in isolator
The Context Plus Waterproof manual call point has a highly visible alarm indicator which can be seen from up to 10 metres away. The manual call point
S.P.S — Product
Red manual addressable call point- resettable – SA5900-908 with built-in 20 devices isolator- LPCB APPROVED
The Context Plus Intelligent Addressable Red Manual Call Point has been designed to operate on a loop of intelligent fire detection devices. An alarm
- Genuine, fully-supported equipment
- Technical guidance from our engineers
- Add several products, request one quote
Overview
Product Details
The Red manual addressable call point- resettable – SA5900-908 with built-in 20 devices isolator- LPCB APPROVED is part of the Analogue Addressable Manual Call Points And Pull Stations range from Context Plus, supplied and supported by SPS. The Context Plus Intelligent Addressable Red Manual Call Point has been designed to operate on a loop of intelligent fire detection devices. An alarm is initiated by pressing the resettable element. The manual call point signals to the Control and Indicating Equipment using an interrupt feature within the Digital Protocol. An alarm status is indicated through the rotation of the resettable element, displaying yellow and black indication bars and a solid red LED. The manual call point can be easily reset from the front using the supplied reset key.
Specifications & features
- The address of each call point is set at the commissioning stage by means of a DIL switch.
- A solid red alarm LED is provided on the manual call point.
- This LED is controlled independently of the call point, by the control panel.
- The LED will flash yellow if there is a fault and flash green when the device is polled.
- Once activated, the Intelligent Manual Call Point can be reset by inserting the reset key into the front facing LED, turning clockwise until a positive click and reset occurs.
- The Intelligent Manual Call Point incorporates a short circuit isolator which will ensure its operation in the event of a short circuit fault on the loop.
- Isolator operation is indicated by a solid yellow LED.
- This manual call point helps reduce installation time as all the initial installation cabling is wired to a removable terminal block which fits neatly in the back of the manual call point.
- Resettable operating element Easy access, front reset mechanism E-Z fit connector system for installation Ergonomic reset key EN 54-11 and EN 54-17 Certified.
- LPCB approved.
- 170° viewable LED Continuity link for cable insulation testing Suitable for semi flush or surface mounting Incorporates a short circuit isolator
