Communicators & Interfaces

Browse by category

Narrow the list, then add what you need to one quote request.

Switch monitor with Back Box & with built-in 20 devices isolator- LPCB APPROVED

Switch monitor with Back Box & with built-in 20 devices isolator- LPCB APPROVED

The Context Plus Intelligent Addressable Switch Monitor is designed to monitor the state of one or more single pole, volt-free contacts connected on a
Sounder controller with Back Box & with built-in 20 devices isolator- 55000-852- LPCB APPROVED

Sounder controller with Back Box & with built-in 20 devices isolator- 55000-852- LPCB APPROVED

The Context Plus Intelligent Addressable Sounder Control Unit with Isolator is used to control the operation of a zone of externally powered sounders,
Red flashing light

Red flashing light

230 Volts red flashing light IP65. Require Relay base EI128R or Ei128RBU or Ei428 to switch it.
Red Fire telephone EVC outstation c/w handset (push to open version)

Red Fire telephone EVC outstation c/w handset (push to open version)

The EVC301PRO is an attractive Type A fire telephone outstation c/w telephone-style handset for use with the Sigtel Fire Telephone system of Context P
Red Fire telephone EVC outstation c/w handset (key lockable)

Red Fire telephone EVC outstation c/w handset (key lockable)

The EVC301RLK is an attractive Type A fire telephone outstation c/w telephone-style handset for use with the Sigtel Fire Telephone system of Context P
Portable Fire Telephone Handset heavy duty (Replaces EVC301/HS)

Portable Fire Telephone Handset heavy duty (Replaces EVC301/HS)

The EVC301/PH A portable fire telephone handset designed for use in conjunction with a series of EVC301/JP Jack Plates on the SigTEL emergency voice c
PC programming software, configurator & mini-USB lead for EVC Control units (allows the optional programming of extension names etc via a Windows PC)

PC programming software, configurator & mini-USB lead for EVC Control units (allows the optional programming of extension names etc via a Windows PC)

The ECU423 is a Configuration Tools software for the Sigtel fire telephone system and disabled refuge system of Context Plus. Devices can be named/edi
Operated relay base with Battery Back-up

Operated relay base with Battery Back-up

230VAC Mains operated relay base with Battery Back-up (will fit underneath the 140RC series, the 160RC and the 2110 series of alarms)
Operated relay base

Operated relay base

230VAC Mains operated relay base (will fit underneath the 140RC series, the 160RC and the 2110 series of alarms)
Network communication card (allows up to fourteen ECU-8 or ECU-8NT or ECU-4 or ECU-16 to be interlinked – one required per networked ECU-8 or ECU-8NT or ECU-4 or ECU-16). Use only when the addition of

Network communication card (allows up to fourteen ECU-8 or ECU-8NT or ECU-4 or ECU-16 to be interlinked – one required per networked ECU-8 or ECU-8NT or ECU-4 or ECU-16). Use only when the addition of

The ECU723 network card allows an ECU-224 desk controller to be connected to an ECU-4, ECU-8 or ECU-16 master controller. The ECU723 also acts as a ne
Network communication card (allows up to fourteen ECU-8 or ECU-8NT or ECU-4 or ECU-16 to be interlinked – one required per networked ECU-8 or ECU-8NT or ECU-4 or ECU-16). Use for EVC control units whi

Network communication card (allows up to fourteen ECU-8 or ECU-8NT or ECU-4 or ECU-16 to be interlinked – one required per networked ECU-8 or ECU-8NT or ECU-4 or ECU-16). Use for EVC control units whi

• The ECU722 is a network card that is used for expanding the fire telephone or disabled refuge systems of Context Plus. • Allows up to 14 ECU-4, ECU-
Mini Switch Monitor

Mini Switch Monitor

The Mini Switch Monitor is an interface within an entirely new housing. This allows the unit to be fitted onto a standard 35mm DIN-Rail (using a twist
MFP repeater transmitter

MFP repeater transmitter

The Repeater of the Context Plus MFP panel is implemented by installing a Repeater Transmitter PCB (Part No. FF596T) in the MFP Main panel. This PCB h
MFP end of line device

MFP end of line device

The BF-EOL is an End of Line Unit for the Context Plus Conventional MFP Range of fire panels.
MFP 4-zone MFP extender PCB kit

MFP 4-zone MFP extender PCB kit

The FF501Z is a Four Zone Extender Card that is designed solely for use with the Context Plus Conventional MFP range of fire control panels. It is use
Mains Switching Input/Output unit- LPCB Approved

Mains Switching Input/Output unit- LPCB Approved

The Context Plus Intelligent Addressable Mains Switching Input/Output Unit provides a voltage free, single pole change-over relay output and a monitor
Isolator base for use only with isolator 55000-720

Isolator base for use only with isolator 55000-720

isolator base for use only with only Isolator 55000-720
Isolator (requires 45681-211)- 55000-720 – LPCB Approved

Isolator (requires 45681-211)- 55000-720 – LPCB Approved

The Isolator is placed at intervals on the loop and ensures that, in the case of a short circuit, only the section between the isolators will be affec
Input/Output unit with Back Box & with built-in 20 devices isolator- LPCB APPROVED

Input/Output unit with Back Box & with built-in 20 devices isolator- LPCB APPROVED

The Context Plus Intelligent Addressable Input/Output Unit provides supervision of one or more normally open contacts connected to a single pair of ca
HUSH BUTTON BS 5839-6 (Apollo /Discovery/Xplorer protocol)

HUSH BUTTON BS 5839-6 (Apollo /Discovery/Xplorer protocol)

The Context Plus Hush Button can be looked on as miniature fully monitored single zone fire panel that sit on the Context Plus Addressable loop. The H